service nat ipv6-to-ipv4 rule <rule-number> inbound-interface <inbound_intf>
Specifies the service IPv6-to-IPv4 rule to apply to the inbound interface.
- rule-number
- The rule to apply to the inbound IPv6 traffic. The identifier ranges from 1 through 9999.
- inbound_intf
- The data plane interface for which to enable NAT 6-4 translation.
Configuration mode
service {
nat {
ipv6-to-ipv4 {
rule rule-number {
inbound-interface inbound_intf
}
}
}
}
Use the set form of this command to specify the service IPv6-to-IPv4 rule to apply to the inbound interface.
Use the delete form of this command to delete the service IPv6-to-IPv4 rule.
Use the show form of this command to display the configured IPv6-to-IPv4 rules.