show ip <ip> route <route>
Controls the display of the tag assigned to a static route.
ip <ip>- Where
<ip>is[ ip | ipv6 ].ip: Internet Protocol version 4 (IPv4).ipv6: Internet Protocol version 6 (IPv6).
route <route>- Where
<route>is[ <ip> | <prefix> ].<ip><prefix>
Output — IPv4
user@system:~$ show ip route 11.1.5.0
Routing entry for 11.1.5.0/24
Known via "static", distance 1, metric 0, tag 1, best
* via 10.10.100.2, dp0p1s2.100Output — IPv6
user@system:~$ show ipv6 route 11:1:3::
Routing entry for 11:1:3::/64
Known via "static", distance 1, metric 0, tag 2, best
* is a summary, RejectOutput — withdrawn routes
When displaying detailed output routes which have been withdrawn due to path monitor compliance state are marked as such.
user@system:~$ show ip route 2.2.2.2
Routing entry for 2.2.2.2/32
Known via "static", distance 1, metric 0, tag 0
via 10.10.1.2, dp0p1s1 inactive, due to path monitor stateThis output indicates that the static route to 2.2.2.2/32 via 10.10.1.2 has been withdrawn because at least one of the monitor/policy pairs associated with the route is not in the required state. To determine the affected pairs use the show protocols static path-monitor cache command.