Vyatta Network OS Documentation

Learn how to install, configure and operate the Vyatta NOS, which helps drive our virtual networking & physical platforms portfolio.

Related commands documented elsewhere

Commands for using other system features with data plane interfaces are located in the following guides or chapters in this guide.

Related Commands Documented Elsewhere

Bridging

Layer 2 bridging is supported on data plane interfaces. Commands for configuring bridge groups are described in Ciena Vyatta Network OS Bridging Configuration Guide.

DHCP

DHCP is supported on data plane interfaces. Commands for configuring DHCP are described in Ciena Vyatta Network OS Services Configuration Guide.

Firewall

Firewall is supported on data plane interfaces. Commands for configuring firewall are described in Ciena Vyatta Network OS Firewall Configuration Guide.

Link Bonding

Data plane link bonding is supported for data plane interfaces. Commands for configuring data plane link bonding are described in “Data Plane Interfaces.”

Multicast

Multicast is supported on data plane interfaces. Commands for configuring multicast are described in Ciena Vyatta Network OS Multicast Routing Configuration Guide.

OSPF

OSPF is supported on data plane interfaces. Commands for configuring OSPF are described in Ciena Vyatta Network OS OSPF Configuration Guide.

PIM

Policy Based Routing

Policy Based Routing is supported on data plane interfaces. Commands for configuring Policy Based Routing are described in Ciena Vyatta Network OS Policy-based Routing Configuration Guide.

PPPoE

PPPoE encapsulation is supported on data plane interfaces. Commands for configuring PPP-based encapsulation are described in Vyatta PPP-Based Encapsulations Reference Guide .

QoS

Quality of service traffic policies are supported on data plane interfaces. Commands for configuring QoS are described in Ciena Vyatta Network OS QoS Configuration Guide.

RIP

RIP is supported on data plane interfaces. Commands for configuring RIP are described in Ciena Vyatta Network OS RIP Configuration Guide.

RIPng

RIPng is supported on data plane interfaces. Commands for configuring RIPng are described in Ciena Vyatta Network OS RIPng Configuration Guide.

System interfaces

Commands for showing the physical interfaces available on your system are described in Ciena Vyatta Network OS Basic System Configuration Guide .

VLAN interfaces

802.1Q VLAN operation is supported on data plane interfaces. Commands for configuring VLAN interfaces (vifs) are described in Data Plane Interfaces.

VRRP

VRRP is supported on data plane interfaces and on VLAN interfaces configured under data plane interfaces. Commands for configuring VRRP are described in Ciena Vyatta Network OS High Availability Configuration Guide .