show ip igmp interface
Displays the operational state of IGMP on an interface.
When used with no option, this command displays the operational state of all IGMP-enabled interfaces.
- interface
- Displays the operational state of the specified interface.
Operational mode
Use this command to display the state of IGMP on interfaces.
The following example shows IGMP interface information for interface dp0p1p2.
vyatta@vyatta:~$ show ip igmp interface dp0p1p2
Interface dp0p1s1 (Index 9)
IGMP Enabled, Active, Forced Querier, Configured for version 3
Internet address is 10.10.1.2
IGMP interface limit is 5000
IGMP interface has 0 group-record states
IGMP activity: 0 joins, 0 leaves
IGMP query interval is 126 seconds
IGMP Startup query interval is 31 seconds
IGMP Startup query count is 2
IGMP querier timeout is 257 seconds
IGMP max query response time is 10 seconds
Group Membership interval is 262 seconds
IGMP Last member query count is 2
Last member query response interval is 1000 milliseconds