show ip route supernets-only
Displays supernet routes.sect
Operational mode
Use this command to display supernet routes.
Supernet routes are routes that have a subnet mask that is less specific than the usual classful mask.
The following example shows how to display supernet routes.
vyatta@vyatta:~$ show ip route supernets-only
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
I - ISIS, B - BGP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 10.1.0.1, dp0p0p0
vyatta@vyatta:~$