Vyatta Network OS Documentation

Learn how to install, configure and operate the Vyatta NOS, which helps drive our virtual networking & physical platforms portfolio.

protocols static route <subnet> next-hop <address>

Configures the next hop for a static route.

set protocols static route subnet next-hop address [ disable | distance distance | fall-over bfd | interface interface-name ]
delete protocols static route subnet next-hop address [ disable | distance | fall-over bfd | interface interface-name ]
show protocols static route subnet next-hop address [ disable | distance | fall-over | interface ]
subnet
Multi-node. A static route. The format is a destination subnet of the form address/prefix (x.x.x.xlx).

You can define multiple static routes by creating multiple route configuration nodes.

address
The address of the next-hop router.
disable
Disables the static route.
distance distance
Sets the next-hop distance for this route. Routes with a smaller distance are selected before those with a larger distance. The distance ranges from 1 through 255. The default distance is 1.
fall-over bfd
Enables BFD support for fallover.
interface interface-name
Specifies the name of the outgoing intrface.

Configuration mode

protocols {
	static {
		route subnet {
			next-hop address {
				disable
				distance distance
    fall-over bfd
				interface interface-name
			}
		}
	}

}

Use the set form of this command to configure the next hop for a static route.

Use the delete form of this command to remove the next hop from a static route.

Use the show form of this command to view the next hop for a static route.