protocols static table <table> route6 <subnet> next-hop <address>
Configures the next hop for an IPv6 static route in an alternate routing table.
- table table
- Multi-node. An alternate routing table to be used by policy-based routing rules.
- route6 subnet
- Multi-node. An IPv6 static route. The format is a destination subnet of the form IPv6- address/prefix (h:h:h:h:h:h:h:h/x).
You can define multiple static routes by creating multiple route6 configuration nodes.
- disable
- Disables the IPv6 static route.
- distance distance
- The next-hop distance for this route. Routes with a smaller distance are selected before those with a larger distance.
Configuration mode
protocols {
static {
table table {
route6 subnet {
next-hop address {
disable
distance distance
interface interface
}
}
}
}
}
Use this command to configure IPv6 static routes on the system in an alternate routing table. The alternate routing tables are used with policy-based routing. Refer to Ciena Vyatta Network OS Policy-based Routing Configuration Guide for information on policy-based routing.
Use the set form of this command to configure the next hop for an IPv6 static route in an alternate routing table.
Use the delete form of this command to remove the next hop for an IPv6 static route in an alternate routing table.
Use the show form of this command to view the next hop for an IPv6 static route in an alternate routing table.