R3: show ip bgp
The following example shows the output of the show ip bgp command for router R3 at this stage of the configuration.
vyatta@R3:~$ show ip bgp
BGP table version is 0, local router ID is 10.0.0.33
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 3.0.0.0/24 10.0.0.44 0 100 0 (65021) 300 i
*> 3.1.0.0/24 10.0.0.44 0 100 0 (65021) 300 i
*> 3.2.0.0/24 10.0.0.44 0 100 0 (65021) 300 i
*>i12.0.0.0 10.0.0.11 0 100 0 200 i
*> 13.0.0.0/24 10.0.0.44 0 100 0 (65021) 300 i
*> 99.99.99.0/30 10.0.0.44 0 100 0 (65021) 300 i
* i172.16.0.0/24 10.0.0.11 1 100 0 i
* 10.0.0.22 1 100 0 (65021) i
*> 0.0.0.0 1 32768 i
Total number of prefixes 7