R4: show ip bgp
The following example shows the output of the show ip bgp command for router R4 at this stage of the configuration.
vyatta@R4:~$ show ip bgp
BGP table version is 70, local router ID is 10.0.0.44
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, l - labeled
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.0.0.0 99.99.99.2 0 0 300 i
*>i12.0.0.0 88.88.88.2 0 100 0 200 i
*> 172.16.0.0/12 99.99.99.2 0 0 300 i
*> 172.16.0.0/24 0.0.0.0 100 32768 i
*> 192.168.0.0/16 99.99.99.2 0 0 300 i
Total number of prefixes 5
Router R4's BGP table contains the paths it learned from its eBGP peer, as well as the paths it learned from its iBGP neighbor R1.