Configuring IPv6 routing with BGP
This section presents sample configurations for dynamic IPv6 routing with BGP.
The configuration examples that follow are based on using internal BGP (iBGP) and external BGP (eBGP) to connect and achieve communication. In this example we show configuration of the nodes using dynamic IPv6 routing with iBGP and eBGP to enable R1 and R3 to communicate through R2. To achieve this, you must configure R1 and R2 as iBGP peers, then configure R2 and R3 as eBGP peers.
For information on iBGP and eBGP, see iBGP and eBGP.
For information on configuring neighbors, see Neighbor Commands.