home

Supported platforms

Vyatta documentation

Learn how to install, configure, and operate the Vyatta Network Operating System (Vyatta NOS) and Orchestrator, which help drive our virtual networking and physical platforms portfolio.

show ipv6 ripng

Displays information about RIPng.

show ipv6 ripng [ interface | status ]

Displays all information about RIPng.

interface
Optional. Displays information for RIPng interfaces.
status
Optional. Displays only RIPng protocol status information.

Operational mode

Use this command to display information about RIPng.

The following example lists RIPng information.


vyatta@vyatta:~$ show ipv6 ripng
Codes: R - RIPng, C - connected, S - Static, O - OSPF, B - BGP
Sub-codes:
      (n) - normal, (s) - static, (d) - default, (r) - redistribute,
      (i) - interface, (a/S) - aggregated/Suppressed

   Network      Next Hop                      Via     Metric Tag Time
C(i) 2001:db8:1::/64 
                  ::                          self       1    0  
R(n) 2001:db8:2::/64 
                  fe80::20c:29ff:fed6:816c    dp0s1      2    0  02:56
R(n) 2001:db8:3::/64 
                  fe80::20c:29ff:fed6:816c    dp0s1      3    0  02:56
vyatta@vyatta:~$

The following example lists RIPng protocol status information.


vyatta@vyatta:~$ show ipv6 ripng status
  Routing Protocol is "RIPng"
  Sending updates every 30 seconds with +/-50%, next due in 4 seconds
  Timeout after 180 seconds, garbage collect after 120 seconds
  Outgoing update filter list for all interface is not set
  Incoming update filter list for all interface is not set
  Default redistribution metric is 1
  Redistributing:
	     Interface
      dp0s1