Vyatta NOS documentation

Learn how to install, configure, and operate Vyatta Network Operating System (Vyatta NOS), which helps to drive our virtual networking and physical platforms portfolio.

R3: show ip rip

The show ip rip command for R3 displays similar information in a different format. This is shown in the following example.


vyatta@R3:~$ show ip rip
Codes: R - RIP, C - connected, S - Static, O - OSPF, B - BGP
Sub-codes:
      (n) - normal, (s) - static, (d) - default, (r) - redistribute,
      (i) - interface

     Network            Next Hop         Metric From            Tag Time
R(n) 10.0.30.0/24       10.0.50.2             3 10.0.50.2         0 00:22
R(n) 10.0.40.0/24       10.0.50.2             2 10.0.50.2         0 00:22
C(i) 10.0.50.0/24       0.0.0.0               1 self              0
C(i) 10.0.60.0/24       0.0.0.0               1 self              0
vyatta@R3:~$

Again, the output shows that networks 10.0.30.0/24, and 10.0.40.0/24 have been learned via RIP and that packets to those networks will be forwarded to 10.0.50.2. Networks 10.0.50.0/24 and 10.0.60.0/24 are directly connected. Again, there is no route to 10.0.20.0/24.