home

Supported platforms

Getting startedOverviewArchitectureSupported platformsRelease notesWhite papers
Getting startedOverviewArchitectureSupported platformsRelease notesWhite papers

Vyatta documentation

Learn how to install, configure, and operate the Vyatta Network Operating System (Vyatta NOS) and Orchestrator, which help drive our virtual networking and physical platforms portfolio.

Show On this page:

thumbnailSupported platforms

Configuring RSVP-TE

Enabling MPLS RSVP-TE monitoring

How to enable MPLS RSVP-TE monitoring

RSVP-TE must be enabled on interfaces before MPLS RSVP is supported.
You can enable or disable all or specific RSVP-TE event monitoring.
  1. To enable RSVP-TE event monitoring, enter the monitor protocols mpls rsvp enable [ cspf | events | fsm | nsm | packet | rib ] command. 
    vyatta@vyatta:~$ monitor protocols mpls rsvp enable nsm
  2. To disable RSVP-TE event monitoring, enter the monitor protocols mpls rsvp disable [ cspf | events | fsm | nsm | packet | rib ] command. 
    vyatta@vyatta:~$ monitor protocols mpls rsvp disable nsm

Last updated: May 7, 2021