show mpls ldp lsp
Displays the MPLS LDP LSPs.
- detail
- Displays detailed information on the LSPs.
- host
- Displays the LSP information per host LSP.
- prefix
- Displays the LSP information per LSP prefix.
Operational mode
Use this command to display the MPLS LDP LSPs (Label Switch Paths) for a given FEC.
The following example shows how to display which interfaces are enabled for MPLS LDP label switching.
vyatta@vyatta:~$ show mpls ldp lsp
FEC IPV4:1.1.1.1/32 ->
1.1.1.1/32 192.166.1.1 Established impl-null 0
1.1.1.1/32 192.166.3.2 Established 52490 0
FEC IPV4:2.2.2.2/32 ->
2.2.2.2/32 connected Established none 0 None
2.2.2.2/32 Established impl-null 0 None
2.2.2.2/32 Established impl-null 0 None
FEC IPV4:3.3.3.3/32 ->
3.3.3.3/32 connected Established 52483 0
3.3.3.3/32 Established 52481 0 None
3.3.3.3/32 192.166.3.2 Established impl-null 0
3.3.3.3/32 Established 52481 0 None
FEC IPV4:10.0.0.0/8 ->
10.0.0.0/8 connected Established 52480 0
10.0.0.0/8 Established 52484 0 None
10.0.0.0/8 Established 52484 0 None
10.0.0.0/8 connected Established 52484 0
10.0.0.0/8 Established 52484 0 None
10.0.0.0/8 Established 52484 0 None
10.0.0.0/8 192.168.252.253 Established none 0 None
10.0.0.0/8 Established 52484 0 None
10.0.0.0/8 Established 52484 0 None
FEC IPV4:30.1.0.0/24 ->
30.1.0.0/24 invalid Established impl-null 0
FEC IPV4:100.2.1.0/24 ->
100.2.1.0/24 invalid Established 52481 0
FEC IPV4:100.2.2.0/24 ->
100.2.2.0/24 invalid Established 52482 0