home

Supported platforms

Getting startedOverviewArchitectureSupported platformsRelease notesWhite papers
Getting startedOverviewArchitectureSupported platformsRelease notesWhite papers

Vyatta documentation

Learn how to install, configure, and operate the Vyatta Network Operating System (Vyatta NOS) and Orchestrator, which help drive our virtual networking and physical platforms portfolio.

Show On this page:

thumbnailSupported platforms

MPLS Commands

monitor dataplane mpls

Enables or disables the generation of debug messages that are related to MPLS events or packet errors on the data plane.

monitor dataplane mpls { events | packet-error } { enable | disable }

Operational mode

Use this command to enable or disable the generation of debug messages that are related to MPLS events or packet errors on the data plane.

The following example shows how to enable MPLS data plane events monitoring. 


vyatta@vyatta:~$ monitor dataplane mpls events enable
As a result, MPLS data plane event entries are logged into the data plane log, as shown with the following example of an MPLS data plane event entry in the /var/log/dataplane/vplane.log data plane log. 

[  643.678900] MPLS: RTM_NEWROUTE table 254 type unicast scope 0 proto 11 in 53135 payload 4 out 548080 dev dp0p1s12 via 10.10.12.7

Last updated: May 7, 2021