show dataplane mpls interfaces
Displays the MPLS-enabled interfaces that are on the data plane
Operational mode
Use this command to display the interfaces that support MPLS on the data plane.
The following example shows how to display the MPLS-enabled interfaces on the data plane.
vyatta@vyatta:~$ show dataplane mpls interfaces
MPLS Interfaces
dp0p1s1, ifindex: 9, mtu: 1500
address: 192.166.3.1/30 fe80::5054:ff:fe00:201/64 192:166:3::1/64
dp0p1s2, ifindex: 10, mtu: 1500
address: 192.166.5.1/30 192:166:5::1/64 fe80::5054:ff:fe00:202/64
dp0p1s3, ifindex: 11, mtu: 1500
address: 192.166.1.2/30 192:166:1::2/64 fe80::5054:ff:fe00:203/64