show mpls label-table [ longer-prefixes ]
Displays the MPLS label table.
- x.x.x.x/x
- The prefix or address parameter. Specify an IPv4 prefix to display any FEC that matches the supplied prefix.
Operational mode
Use this command to display the MPLS label table that is used to forward MPLS-encapsulated traffic.
The following example shows how to display the MPLS label table that is used to forward MPLS-encapsulated traffic.
vyatta@vyatta:~$ show mpls label-table
Codes: > - selected ILM, p - stale ILM, K - CLI ILM, T - MPLS-TP
Code FEC In-Lbl Out-Lbl In-Intf Out-Intf Nexthop
> 3.3.3.3/32 52481 3 dp0p1s3 dp0p1s1 192.166.3.2
> 10.0.0.0/8 52484 N/A dp0p1s1 dp0s4 192.168.252.253
> 192.166.4.0/30 52480 3 dp0p1s3 dp0p1s1 192.166.3.2
> 10.0.0.0/8 52484 N/A dp0p1s3 dp0s4 192.168.252.253
> 192.166.8.0/30 52482 3 dp0p1s3 dp0p1s1 192.166.3.2
> 192.166.2.0/30 52485 3 dp0p1s3 dp0p1s1 192.166.3.2
The following example shows how to display the MPLS label table using the longer-prefixes option.
vyatta@vyatta:~$ show mpls label-table 10.10.8.0/22 longer-prefixes
Codes: > - selected ILM, p - stale ILM, K - CLI ILM, T - MPLS-TP
Code FEC In-Lbl Out-Lbl In-Intf Out-Intf Nexthop
> 10.10.9.0/24 53125 53123 dp0p1s11 dp0p1s12 10.10.12.7
> 10.10.8.0/24 53124 3 dp0p1s11 dp0p1s12 10.10.12.7
> 10.10.10.0/24 53134 3 dp0p1s12 dp0p1s11 10.10.11.5