protocols mpls-rsvp tunnels tunnel primary bandwidth
Configures the bandwidth to be reserved along the primary path.
- name
- The tunnel name.
- 1-10000000000
- The bandwidth reserved for the tunnel. The bandwidth can be from 1 through 10000000000.
Configuration mode
protocols {
mpls-rsvp {
tunnels {
tunnel <name> {
primary {
bandwidth <1-10000000000>
}
}
}
}
}
Use this command to configure the bandwidth to be reserved along the primary path. The interfaces must be configured with a maximum reservable bandwidth before tunnels can reserve bandwidth on the interfaces. By default, no bandwidth is reserved.
Use the set form of this command to configure the bandwidth to be reserved along the primary path.
Use the delete form of this command to delete the configuration of the bandwidth to be reserved along the primary path.
Use the show form of this command to display the configuration of the bandwidth to be reserved along the primary path.
Example
The following example shows how to configure 1000000 as bandwidth to be reserved along the primary path for the RSVP-TE tunnel named pe1-pe2.
vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2 primary bandwidth 1000000