protocols mpls-rsvp tunnels tunnel primary fast-reroute priority hold
Configures a hold priority for a session on a fast reroute detour.
- name
- The tunnel name.
- 0-7
- The hold priority for the session. The priority can be zero through seven, where zero is the highest priority.
Configuration mode
protocols {
mpls-rsvp {
tunnels {
tunnel <name> {
primary {
primary {
fast-reroute {
hold <0-7>
}
}
}
}
}
}
}
Use this command to configure a hold priority for this session on the fast reroute detour. The default is 0 (highest), which means it will not be pre-empted by higher priority sessions.
Use the set form of this command to configure a hold priority for this session on the fast reroute detour.
Use the delete form of this command to delete the configuration of a hold priority for this session on the fast reroute detour.
Use the show form of this command to display the configuration of a hold priority for this session on the fast reroute detour.
Example
The following example shows how to set the hold priority to 7 (the lowest priority) for the session along the fast reroute detour for the primary path for the RSVP-TE tunnel named pe1-pe2.
vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2 primary fast-reroute priority hold 7