Vyatta NOS documentation

Learn how to install, configure, and operate Vyatta Network Operating System (Vyatta NOS), which helps to drive our virtual networking and physical platforms portfolio.

protocols mpls-rsvp tunnels tunnel primary fast-reroute priority setup

Configures a setup priority for a session on a fast reroute detour.

set protocols mpls-rsvp tunnels tunnel name primary fast-reroute priority setup 0-7
delete protocols mpls-rsvp tunnels tunnel name primary fast-reroute priority setup 0-7
show protocols mpls-rsvp tunnels tunnel name primary fast-reroute priority setup 0-7
name
The tunnel name.
0-7
The setup priority for the session. The priority can be zero through seven, where zero is the highest priority.

Configuration mode


protocols {
    mpls-rsvp {
        tunnels  {
            tunnel <name> {
                primary {
                    fast-reroute {
                        priority {
                            setup <0-7>
                        }
                    }
                }
            }
        }
    }
}

Use this command to configure a setup priority for this session on a fast reroute detour. The default is 7 (lowest), which means the session cannot pre-empt lower priority sessions.

Use the set form of this command to configure a setup priority for this session on a fast reroute detour.

Use the delete form of this command to delete the configuration of a setup priority for this session on a fast reroute detour.

Use the show form of this command to display the configuration of a setup priority for this session on a fast reroute detour.

Example

The following example shows how to set the setup priority to zero for the session along the fast reroute detour for the primary path for the RSVP-TE tunnel named pe1-pe2. Zero is the highest priority, which means this session can pre-empt lower priority sessions.

vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2 primary fast-reroute priority setup 0