protocols mpls-rsvp tunnels tunnel secondary priority setup
Configures a setup priority for a session.
- name
- The tunnel name.
- 0-7
- The setup priority for the session. The priority can be zero through seven, where zero is the highest priority.
Configuration mode
protocols {
mpls-rsvp {
tunnels {
tunnel <name> {
secondary {
priority {
setup <0-7>
}
}
}
}
}
}
Use this command to configure a setup priority for this session. The default is 7 (lowest), which means the session cannot pre-empt lower priority sessions.
Use the set form of this command to configure a setup priority for this session.
Use the delete form of this command to delete the configuration of a setup priority for this session.
Use the show form of this command to display the configuration of a setup priority for this session.
Example
The following example shows how to set the setup priority to zero for the session along the secondary path for the RSVP-TE tunnel named pe1-pe2. Zero is the highest priority, which means this session can pre-empt lower priority sessions.
vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2 secondary priority setup 0