Vyatta NOS documentation

Learn how to install, configure, and operate Vyatta Network Operating System (Vyatta NOS), which helps to drive our virtual networking and physical platforms portfolio.

show mpls rsvp neighbor

Displays a summary of all RSVP neighbors, or the list of active LSPs for a specific neighbor.

show mpls rsvp neighbor [ ip-address ]
ip-address
The address of a specific neighbor.

Operational mode

Use this command to display a summary of all MPLS RSVP neighbors, or the list of active LSPs for a specific neighbor.

The following example shows how to display a summary of all RSVP neighbors.


 vyatta@vyatta:~$ show mpls rsvp neighbor 
IP Address          UpStrm LSP DnStrm LSP RefreshReduc Srefresh    In  Type      GraceRestart
192.166.2.1         1          0          Enabled      22s             Explicit  Incapable
192.166.3.1         0          0          Enabled      not running     Explicit  Incapable
192.166.4.2         0          0          Enabled      not running     Explicit  Incapable
192.166.8.2         0          1          Enabled      2s              Explicit  Incapable

The following example shows how to display the list of active LSPs for a specific neighbor.


vyatta@vyatta:~$ show mpls rsvp neighbor 192.166.2.1
 Nbr Hello State: Up
 Upstream LSPs: 0, Downstream LSPs: 0
 Neighbor supports Refresh Reduction, next SRefresh transmission in: 15s
 Neighbor does not support Graceful Restart.

The following example shows how to display the list of active LSPs for a neighbor that is capable of grateful restart.


vyatta@vyatta:~$ show mpls rsvp neighbor 10.10.12.66
 Nbr Hello State: Up
 Upstream LSPs: 1, Downstream LSPs: 0
 Neighbor does not support Refresh Reduction, no SRefresh transmission scheduled
 Neighbor supports Graceful Restart, Restart time: 60000 msec, Recovery time: 0 msec

  Tunnel ID  LSP ID     Ingress             Egress              Type
  4676       2          66.66.66.66         2.2.2.2             Upstream