show openvpn site-to-site status
Displays information on OpenVPN connections in site-to-site mode.
Operational mode
Use this command to display information on all connected sites. This command is only available on a site-to-site-mode endpoint.
The following example shows the output of this command.
vyatta@vyatta:~$ show openvpn site-to-site status
OpenVPN client status on vtun1 [openvpn with psk]
Remote CN Remote IP Tunnel IP TX byte RX byte Connected Since
--------------- --------------- --------------- ------- ------- ----------------------
None (PSK) 192.168.74.160 192.168.2.2 8.9K 8.8K N/A
OpenVPN client status on vtun0 [openvpn with tls]
Remote CN Remote IP Tunnel IP TX byte RX byte Connected Since
--------------- --------------- --------------- ------- ------- ----------------------
N/A 192.168.74.160 192.168.1.2 17.5K 15.1K N/A