service nat destination rule <rule-number> translation <address>
Specifies a translated address or port address in a NAT rule.
- rule-number
- The numeric identifier of a NAT rule. The identifier ranges from 1 through 9999.
- address address
- An IP address or range of addresses to substitute for the original address or addresses. Address formats are as follows:
ip-address: An IP address.
ip-address/prefix: A network. This argument is typically used in bidirectional NAT to translate one network of addresses to another.
ip-address-range: A range of network IP address.
ip-address-group: The name of a resource address group.
- port port
- An IP port to substitute for the original port. It cannot be used when the source address or destination address and the translation address are IPv4 subnets. Port formats are as follows:
port-number: A port number. The number ranges from 1 through 65535.
start-end: A range of contiguous ports; for example, 1001-1005.
Configuration mode
service {
nat {
destination {
rule rule-number {
translation {
address address
port port
}
}
}
}
}Use the set form of this command to configure a translated address or port address for a NAT rule.
Use the delete form of this command to remove a translated address or a port address from a NAT rule.
Use the show form of this command to view a translated address or port address for a NAT rule.