Vyatta NOS documentation

Learn how to install, configure, and operate Vyatta Network Operating System (Vyatta NOS), which helps to drive our virtual networking and physical platforms portfolio.

Configure basic support for NETCONF

An example that shows the one-time steps you must complete to allow NETCONF clients to access Vyatta NOS.

  1. Initialize NETCONF.
    user@system# set service netconf

    Or, to use NETCONF over a VRF:

    user@system# set routing routing-instance <instance> service netconf
  2. Define the port for NETCONF over SSH.
    Note: This command will over-ride the default SSH port, if it is not already configured. To avoid this problem, also make sure that set service ssh port 22 is explicit in the configuration.
    user@system# set service ssh port 830
    In this case, we've defined port 830.
  3. Commit the change.
    user@system# commit
    You should now be able to reach NETCONF on the interfaces you expect.
  4. Optional: Check that Vyatta NOS is listening on the port you configured.
    user@system# show system connections | grep 830
    tcp        0      0 0.0.0.0:830             0.0.0.0:*               LISTEN
    tcp6       0      0 :::830                  :::*                    LISTEN