Vyatta Network OS Documentation

Learn how to install, configure and operate the Vyatta NOS, which helps drive our virtual networking & physical platforms portfolio.

service dhcp-server shared-network-name <name> subnet <ipv4net> ntp-server <ipv4>

Specifies the address of a Network Time Protocol (NTP) server that is available to clients.

set service dhcp-server shared-network-name name subnet ipv4net ntp-server ipv4
delete service dhcp-server shared-network-name name subnet ipv4net ntp-server ipv4
show service dhcp-server shared-network-name name subnet ipv4net ntp-server
name
Mandatory. A DHCP address pool.
ipv4net
Mandatory. Multinode. The IPv4 network served by the DHCP address pool. The format is ip-addr/prefix.
ipv4
Optional. The IP address of an NTP server. Multiple NTP server addresses can be specified in separate commands. The NTP servers should be specified in a preferred order.

Configuration mode


service {
	dhcp-server {
		shared-network-name name {
			subnet ipv4net {
				ntp-server ipv4
			}
		}
	}
}

Use this command to specify the address of an NTP server that is available to clients.

Use the set form of this command to specify the address of an NTP server.

Use the delete form of this command to remove the NTP server configuration.

Use the show form of this command to view the NTP server configuration.