Configuring for networks indirectly connected to the system
This example shows how to create an address pool (dp0p1p1_POOL2) for clients that are indirectly connected to the R1 vRouter pool.
The dp0p1p1_POOL2 address pool serves the 192.168.1.0/24 subnet, which is on a different subnet than the subnet to which the dp0p1p1 data plane interface is connected.
The lease time remains at the default, 24 hours (86,400 seconds). This address pool uses the DNS name server at 172.16.0.34.
To configure the dp0p1p1_POOL2 DHCP address pool, perform the following steps in configuration mode.
Step |
Command |
---|---|
Configure the vRouter interface to listen to DHCP messages. |
|
Create a shared network and associate it with the 192.168.1.0/24 subnet. |
|
Show the configuration. |
|
Show the interface configuration. |
|
Commit the changes. |
|