Configuring BGP
The following commands show how to configure the BGP scheme shown in Configuration.
Router | Step | Commands |
---|---|---|
R1 | On R1, which belong to AS1, assign the remote AS numbers to its BGP neighbors. |
|
R1 | On R1, specify the IPv4 address that BGP advertises to its neighbor. |
|
R2 | On R2, which belong to AS2, assign the remote AS numbers to its BGP neighbors. |
|
R2 | On R2, specify the IPv4 address and prefix of its network address connections. |
|
R3 | On R3, which belong to AS3, assign the remote AS numbers to its BGP neighbors. |
|
R3 | On R3, specify the IPv4 address and prefix of its network address connections. |
|
R4 | On R4, which belong to AS3, assign the remote AS numbers to its BGP neighbors. |
|
R4 | On R4, specify the IPv4 address and prefix of its network address connections. |
|
R5 | On R5, which belong to AS3, assign the remote AS numbers to its BGP neighbors. |
|
R5 | On R5, specify the IPv4 address and prefix of its network address connections. |
|
R6 | On R6, which belong to AS1, assign the remote AS number to its BGP neighbor. |
|
R6 | On R6, specify the IPv4 address and prefix of its network address connections. |
|