Basic RIP configuration
In this section, you configure RIP on the routers that are labeled R1, R2, and R3 in the sample configuration in Configuring RIP. The routers are advertising their routes on the 10.0.40.0/24 and 10.0.50.0/24 networks.
It is assumed for this example that you have already configured the router interfaces; only the steps required to implement RIP are shown.
To create a basic RIP configuration, perform the following steps in configuration mode:
Router | Step | Command |
---|---|---|
R1 | Advertise to the 10.0.40.0/24 network. |
|
R1 | Redistribute connected routes to RIP. |
|
R1 | Commit the configuration. |
|
R1 | Display the configuration. |
|
R2 | Advertise to the 10.0.40.0/24 network. |
|
R2 | Advertise to the 10.0.50.0/24 network. |
|
R2 | Redistribute connected routes to RIP. |
|
R2 | Commit the configuration. |
|
R2 | Display the configuration. |
|
R3 | Advertise to the 10.0.50.0/24 network. |
|
R3 | Redistribute connected routes to RIP. |
|
R3 | Commit the configuration. |
|
R3 | Display the configuration. |
|