show ip rip
Displays information for the Routing Information Protocol (RIP).
Displays all RIP protocol information.
- status
- Optional. Displays only protocol status.
Operational mode
Use this command to display protocol information for RIP.
The following example shows how to display protocol information for RIP.
vyatta@vyatta:~$ show ip rip
Codes: R - RIP, C - connected, S - Static, O - OSPF, B - BGP
Sub-codes:
(n) - normal, (s) - static, (d) - default, (r) - redistribute,
(i) - interface
Network Next Hop Metric From Tag Time
C(i) 192.168.1.0/24 0.0.0.0 1 self 0
vyatta@vyatta:~$