Supported Interface Types
The following table shows the syntax and parameters of supported interface types. Depending on the command, some of these types may not apply.
Interface Type | Syntax | Parameters |
---|---|---|
Bridge | bridgebrx | brx: The name of a bridge group. The name ranges from br0 through br999. |
Data plane | dataplaneinterface-name | interface-name: The name of a data plane interface. Following are the supported formats of the interface name:
|
Data plane vif | dataplane interface-name vif vif-id [vlan vlan-id ] | interface-name: Refer to the preceding description. vif-id: A virtual interface ID. The ID ranges from 1 through 4094. vlan-id: The VLAN ID of a virtual interface. The ID ranges from 1 through 4094. |
Loopback | loopback lo or loopback lon | n: The name of a loopback interface, where n ranges from 1 through 99999. |
OpenVPN | openvpnvtunx | vtunx: The identifier of an OpenVPN interface. The identifier ranges from vtun0 through vtunx, where x is a nonnegative integer. |
Tunnel | tunneltunx or tunneltunxparameters | tunx: The identifier of a tunnel interface you are defining. The identifier ranges from tun0 through tunx, where x is a nonnegative integer. |
Virtual tunnel | vtivtix | vtix: The identifier of a virtual tunnel interface you are defining. The identifier ranges from vti0 through vtix, where x is a nonnegative integer. Note: Before you can configure a vti interface, you must configure a corresponding vpn. Note: This interface does not support IPv6. |
VRRP | parent-interface vrrpvrrp-groupgroup | parent-interface: The type and identifier of a parent interface; for example, data plane dp0p1p2 or bridge br999. group: A VRRP group identifier. The name of a VRRP interface is not specified. The system internally constructs the interface name from the parent interface identifier plus the VRRP group number; for example, dp0p1p2v99. Note that VRRP interfaces support the same feature set as does the parent interface. |