service snmp v3 trap-target <addr> user <username>
Defines an SNMPv3 username for authentication at the trap target.
- addr
- The IPv4 or IPv6 address of the SNMPv3 trap target.
- username
- The name of an SNMPv3 user at the trap target.
Configuration mode
service {
snmp {
v3 {
trap-target addr {
user username
}
}
}
}
Use this command to define a username for authentication at the trap target.
Use the set form of this command to define a username for authentication at the trap target.
Use the delete form of this command to remove a username for authentication.
Use the show form of this command to view a username for authentication.