show snmp v3 trap-target
Displays the list of SNMP version 3 trap targets.
Operational mode
Use this command to display the list of SNMP version 3 trap targets.
The following example shows the output for show snmp v3 trap-target.
vyatta@R1:~$ show snmp v3 trap-target
SNMPv3 Trap-targets:
Trap-target Port Protocol Auth Priv Type EngineID Routing-Instance User
----------- ---- -------- ---- ---- ---- -------- ---------------- ----
2.2.2.2 '162' 'udp' 'md5 'infor 'vrf4' 'test'
vyatta@R1:~$