protocols mpls-rsvp tunnels tunnel
Configures the head-end for an RSVP-TE tunnel.
- name
- The tunnel name.
Configuration mode
protocols {
mpls-rsvp {
tunnels {
tunnel <name>
}
}
}
Use this command to configure the head-end for an RSVP-TE tunnel. No sessions will be established unless a destination is configured.
Use the set form of this command to configure the head-end for an RSVP-TE tunnel.
Use the delete form of this command to delete the configuration of the head-end for an RSVP-TE tunnel.
Use the show form of this command to display the configuration of the head-end for an RSVP-TE tunnel.
Example
The following example shows how to configure the head-end for an RSVP-TE tunnel named pe1-pe2.
vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2