security vpn l2tp remote-access dhcp-interface <interface>
Specifies a DHCP client interface to use for remote access L2TP VPN connections.
- interface
- The interface to use for remote access L2TP VPN connections (for example, dp0p1p1). Note that the interface must already have IPsec VPN enabled, using the security vpn ipsec ipsec-interfaces interface if-name command (described in the Ciena Vyatta Network OS IPsec Site-to-Site VPN Configuration Guide), and must be configured as a DHCP client.
Configuration mode
security {
vpn {
l2tp {
remote-access {
dhcp-interface interface
}
}
}
}
Use this command to specify a DHCP client interface to use for remote access L2TP VPN connections. Connections will be automatically restarted if the IP address changes.
The DHCP interface is the interface facing the external network. This is the interface to which the L2TP server binds, and only remote connections coming into this interface will be accepted.
Use the set form of this command to specify a DHCP interface to use for remote access L2TP VPN connections.
Use the delete form of this command to remove the configuration.
Use the show form of this command to view the configuration.