policy route pbr <name> rule <rule-number> address-family <address-family>
Defines the address family for an IP routing policy rule.
- name
- The name of an IP routing policy. The policy name must be unique and must not be used with other PBR policy commands.
- rule-number
- The numeric identifier of the rule. Rule numbers determine the order in which rules are executed. Each rule must have a unique rule number. The numbers range from 1 through 9999.
You can define multiple rules by creating more than one rule configuration node.
- address-family
- The address-family for an IP routing policy rule. The address-family for an IP routing policy are ipv4 and ipv6.
Configuration mode
policy {
route {
pbr name {
rule rule-number {
address-family ipv4
address-family ipv6
}
}
}
}
You must specify the address-family, action, and table leaf nodes to configure a routing policy. It is recommended to use the delete policy route pbr name rule number command to delete a routing policy.
Use the set form of this command to define the address family and routing protocol for an IP routing policy rule.
Use the delete form of this command to remove the address family and routing protocol for an IP routing policy rule.
Use the show form of this command to view the address family and routing protocol for an IP routing policy rule.