protocols mpls-rsvp interfaces interface
Enables RSVP-TE on the specified interface.
- name
- The interface name.
Configuration mode
protocols {
mpls-rsvp {
interfaces {
interface <name>
}
}
}
Use this command to enable RSVP-TE on the specified interface. Tunnels can only be established over interfaces which are enabled for RSVP-TE.
Use the set form of this command to enable RSVP-TE on the specified interface.
Example
Use the delete form of this command to delete the configuration of RSVP-TE on the specified interface.
Use the show form of this command to show the configuration of RSVP-TE on the specified interface.
The following example shows how to enable RSVP-TE on the interface named dp0p256p1.
vyatta@R1# set protocols mpls-rsvp interfaces interface dp0p256p1