protocols mpls-rsvp tunnels tunnel autoroute-announce
Enables calculation of routes over TE-tunnels by IGPs.
- name
- The tunnel name.
Configuration mode
protocols {
mpls-rsvp {
tunnels {
tunnel <name> {
autoroute-announce
}
}
}
}
Use this command to enable calculation of routes over TE-tunnels by Interior Gateway Protocols (IGPs). By default, only the route to the tunnel destination is added to the RIB. When calculation of routes over TE-tunnels is enabled, IGPs treat a tunnel as a single link when calculating routes.
Use the set form of this command to enable calculation of routes over TE-tunnels by IGPs.
Use the delete form of this command to delete the configuration that enables calculation of routes over TE-tunnels by IGPs.
Use the show form of this command to display the configuration that enables calculation of routes over TE-tunnels by IGPs.
Example
The following example shows how to allow IGPs to calculate routes over the RSVP-TE tunnel named pe1-pe2.
vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2 autoroute-announce