show interfaces
This command provides a useful summary of the interface state.
Example: show interfaces
$OS_NAME$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Speed/Duplex Description
--------- ---------- --- ------------ -----------
dp0s4 10.10.246.101/24 u/u a-10g/a-full
dp0s5 10.1.1.1/30 u/u a-10g/a-full
dp0s5.7401 192.168.230.34/30 u/u 10g/full Alices Network
dp0s6 - u/u a-10g/a-full
dp0s6.7401 192.168.230.41/30 u/u 10g/full Bobs Network
We can see these facts about the virtual interface dp0s5.7401
:
- It is configured with an IPv4 address of
192.168.230.34
, with a prefix of/30
- It is negotiating a 10 gigabit link at full duplex and the link state is
up