protocols pim6 anycast-rp <rp-address> anycast-rp-peer <rp-peer-address>
Specifies the address of an Rendezvous Point (RP) member in an Anycast-RP set.
- rp-address
- The unicast IPv6 address of an Anycast-RP set.
- rp-peer-address
- The IPv6 address of an RP member of an Anycast-RP set.
Configuration mode
protocols {
pim6 {
anycast-rp rp-address {
anycast-rp-peer rp-peer-address
}
}
}
Use this command to specify the IPv6 address of an RP member of an Anycast-RP set. Register messages are copied to and sent from this address.
Use the set form of this command to specify the IPv6 address of an RP member of an Anycast-RP set.
Use the delete form of this command to remove the IPv6 address of an RP member of an Anycast-RP set.
Use the show form of this command to display the RP member configuration.