show ip route kernel
Displays kernel routes.
Operational mode
Use this command to display kernel routes. Kernel routes are routes that have been added through a means other than by using the Vyatta CLI; for example, by using the operating system route command as shown here:
route add -net 10.172.24.0 netmask 255.255.255.0 gw 10.1.0.1
The following example shows how to display kernel routes.
vyatta@vyatta:~$ show ip route kernel
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
I - ISIS, B - BGP, > - selected route, * - FIB route
K>* 10.172.24.0/24 via 10.1.0.1, dp0p0p0
vyatta@vyatta:~$