show ip ospf border-routers
Displays information about OSPF border routers.
- process pid
- Specifies the PID of an IPv4 OSPF process.
Operational mode
Use this command to display information about OSPF border routers.
The following example shows how to display information about OSPF border routers.
vyatta@vyatta:~$ show ip ospf border-routers
OSPF process 0 VRF (default) internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.0.100.3 [10] via 10.1.1.3, dp0s5, ASBR, Area 10.0.0.1