policy route route-map <map-name> rule <rule-num> match interface <interface-name>
Defines a match condition for a route map based on the first-hop interface.
If no interface match condition is specified, packets are not filtered by interface.
- map-name
- The name of a defined route map.
- rule-number
- The number of a defined route map rule.
- interface-name
- Matches first hop interface specified in the route against the interface name.
Configuration mode
policy {
route-map map-name {
rule rule-num {
match {
interface interface-name
}
}
}
}
Use the set form of this command to define a match condition for a route map policy based on first-hop interface.
Packets are matched based on whether the first-hop interface of the route matches the interface specified by this command. Depending on the action defined for the rule using policy route route-map <map-name> rule <rule-num> action, matched packets are either permitted or denied. Based on the forwarding information specified by the set statements in the route map rule, permitted packets are forwarded to their various destinations.
If more than one match condition is defined in a route map rule, the packet must match all conditions to count as a match. If no match condition is defined for the route map rule, all packets are considered to match the rule.
Use the delete form of this command to remove the interface match condition.
Use the show form of this command to display interface match condition configuration.