AS 200: show ip bgp before applying export filter
The following example shows AS 200's BGP table before the export filter is applied.
vyatta@AS200:~$ show ip bgp
BGP table version is 0, local router ID is 10.0.11.11
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2.0.0.0/24 0.0.0.0 0 32768 i
*> 2.1.0.0/24 0.0.0.0 0 32768 i
*> 2.2.0.0/24 0.0.0.0 0 32768 i
*> 3.0.0.0/24 88.88.88.1 0 100 300 i
*> 3.1.0.0/24 88.88.88.1 0 100 300 i
*> 3.2.0.0/24 88.88.88.1 0 100 300 i
*> 12.0.0.0 0.0.0.0 0 32768 i
*> 13.0.0.0/24 88.88.88.1 0 100 300 i
*> 88.88.88.0/30 0.0.0.0 0 32768 i
*> 99.99.99.0/30 88.88.88.1 0 100 300 i
*> 172.16.0.0/24 88.88.88.1 1 0 100 i
Total number of prefixes 11
vyatta@AS200:~$