protocols mpls-rsvp tunnels tunnel primary fast-reroute bandwidth
Enables fast-reroute with reserved bandwidth.
- name
- The tunnel name.
- 1-10000000000
- The bandwidth to be reserved along the detour. The bandwidth can be from 1 through 10000000000.
Configuration mode
protocols {
mpls-rsvp {
tunnels {
tunnel <name> {
primary {
fast-reroute {
bandwidth <1-10000000000>
}
}
}
}
}
}
Use this command to enable fast-reroute detours with reserved bandwidth. The interfaces must be configured with a maximum reservable bandwidth before tunnels can reserve bandwidth on the interfaces. By default, no bandwidth is reserved.
Use the set form of this command to enable fast-reroute with reserved bandwidth.
Use the delete form of this command to delete the configuration of the bandwidth to be reserved for the fast-reroute.
Use the show form of this command to display the configuration of the bandwidth to be reserved for the fast-reroute.
Example
The following example shows how to configure 1000000 as bandwidth to be reserved for the fast-reroute detour for the RSVP-TE tunnel named pe1-pe2.
vyatta@R1# set protocols mpls-rsvp tunnels tunnel pe1-pe2 primary fast-reroute bandwidth 1000000