home

Supported platforms

Getting startedOverviewArchitectureSupported platformsRelease notesWhite papers
Getting startedOverviewArchitectureSupported platformsRelease notesWhite papers

Vyatta documentation

Learn how to install, configure, and operate the Vyatta Network Operating System (Vyatta NOS) and Orchestrator, which help drive our virtual networking and physical platforms portfolio.

Show On this page:

thumbnailSupported platforms

Example of VFP configuration to handle overlapping IP addresses

Configure the Corporation-A client

An example of how to configure the Corporation-A client.

  1. Specify the interface that connects the Corporation-A client to the Corporation-A router.
    vyatta@CORPA-client# set interfaces dataplane dp0p1p1 address 10.0.2.1/24
  2. Set the default static route from Corporation-A client to the Corporation-A Router as its next hop.
    vyatta@CORPA-client# set protocols static route 0.0.0.0/0 next-hop 10.0.2.2
Before we go into the specifics of configuring the routers for this particular type of IPsec VPN configuration, we must configure the ESP group and the IKE group that will be used by both routers for this VPN site-to-site connection.

Last updated: December 22, 2021