Vyatta NOS documentation

Learn how to install, configure, and operate Vyatta Network Operating System (Vyatta NOS), which helps to drive our virtual networking and physical platforms portfolio.

show bridge <brx> spanning-tree bridge <brief>

Displays bridge spanning tree information for a bridge group.

show bridge brx spanning-tree bridge [ brief ]
brx
The ID of the bridge group.
brief
Displays a summary of spanning tree information for a bridge group.

Operational mode

Use this command to display bridge spanning tree information for a bridge group. Use the brief parameter to display a summary of the spanning tree information for the bridge group. You see a detailed output when you do not use the brief parameter.

The following example shows how to display the spanning tree information for the br0 bridge-group.


vyatta@R1:~$ show bridge br0 spanning-tree bridge
	
br0
   link enabled    yes
   stp enabled     yes
   version         rstp
   bridge id       8.000.52:54:00:00:02:01
   designated root 8.000.52:54:00:00:01:01
   root port       dp0p1s1 (2)
   path cost        2000       internal path cost   0
   max age          20         bridge max age       20
   forward delay    15         bridge forward delay 15
   tx hold count    6          max hops             20
   hello time       2          ageing time          300
   time since topology change 12931
   topology change count      4
   topology change            no
   topology change port       dp0p1s3 (1)
   last topology change port  dp0p1s3 (1)
 

The following example shows how to display a summary of spanning tree information for the br0 bridge-group.


vyatta@R1:~$ show bridge br0 spanning-tree bridge brief
	
Bridge                   br0
Designated Root          8.000.52:54:00:00:01:01
Designated Root Cost     8000
Designated Root Port     dp0p1s1 (2)
Bridge ID                8.000.52:54:00:00:02:01