Vyatta NOS documentation

Learn how to install, configure, and operate Vyatta Network Operating System (Vyatta NOS), which helps to drive our virtual networking and physical platforms portfolio.

show dataplane mpls label-table [ with-prefix ]

Displays the MPLS label table information on the data plane.

show dataplane mpls label-table [ with-prefix ]
with-prefix
Displays the FEC information in the output.

Operational mode

Use this command to display the label table information used for forwarding MPLS-encapsulated traffic on the data plane.

The following example shows how to display the label table and FEC information on the data plane.

vyatta@vyatta:~$ show dataplane mpls label-table with-prefix 
Label Space: 0
in label: exp-null, fec:ipv4, outgoing label: imp-null 
in label: rtr-alrt, outgoing label: imp-null 
in label: exp6-null, fec:ipv6, outgoing label: imp-null 
in label: 52480, fec:ipv4 192.166.4.0/30
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 52481, fec:ipv4 3.3.3.3/32
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 52482, fec:ipv4 192.166.8.0/30
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 52484, fec:ipv4 10.0.0.0/8
        nexthop via 192.168.252.253, dp0s4
in label: 52485, fec:ipv4 192.166.2.0/30
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 53120 (local), fec:ipv4 192.166.4.0/30
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 53121 (local), fec:ipv4 192.166.8.0/30
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 53128 (local), fec:ipv4 1.1.1.1/32
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: 52490 
        nexthop via 192.166.1.1, dp0p1s3, outgoing label: imp-null 
in label: 53129 (local), fec:ipv4 3.3.3.3/32
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null 
in label: 53130 (local), fec:ipv4 192.166.2.0/30
        nexthop via 192.166.3.2, dp0p1s1, outgoing label: imp-null